EMPCO

Erie Mill and Press Co., Inc.

MILLS AND CALENDERS

* EMPCO has a large surplus of Used and New Mill Rolls, Cracker Rolls, Laboratory Mill Rolls and Calendar Rolls.  Roll sizes range from 32" to 120" Mill Rolls, 30" to 38" Cracker Rolls, 3" to 24" laboratory Mill Rolls, and all standard sizes in Calendar Rolls.  Please Inquire.

EMPCO is known throughout the world as the leader in new and refurbished mixing, warm-up, cracker and laboratory mills. Our equipment has been sold world-wide (including China, Japan, Mexico, Israel, Canada, and Europe) and EMPCO's well-known commitment to quality, customer service, and dependability keep us at the forefront of our industry. Our mills come with many options, below are just a few we provide.


Heavy Duty Production Mills

The EMPCO direct drive increases the life span of this type of mill with smoother operation and greatly reduced vibrations. EMPCO pioneers the low-profile base design, making floor-level installations of all production mills possible. EMPCO is also known for its complete, compact, and efficient designs of mills and their drive systems. Our mills are known throughout industry as some of the most durable and dependable equipment of its type in the industry. Our engineers have designed mills to be the answer to our customer's increasing requirement for high-tech equipment at inexpensive and cost-efficient prices. EMPCO manufactures a complete line of mills from sizes such as: 6"x6"x13" up to the largest 30"x32"x120".

The mill above is a rebuilt 26"x26"x84" rubber mixing mill Right hand drive 250HP(rebuilt in 2005).


16" x 16" x 42" warm-up mill (rebuilt in 1998). Mill has motorized adjustment screws, nylon air tilt guides, floor kick safety, air operated center plows, digital nip readout, and many more options.


Rebuilt 22"x22"x60" rubber mixing mill with a Fawick airbrake, manual adjustment screws, direct driven.


Rebuilt EEMCO 21" x 20" x 52" rubber mixing mill with new box tubing base. 150HP drive.



 

Rebuilt FARREL 20" x 20" x 60" rubber mixing mill with new box tubing base. 150HP drive, Motorized Screw adjustments, safety limit belly bars and overhead cable, pump lubrication system.

 


 

 

Lab Mills

The rubber and plastics industries depend on these maintenance-free versatile EMPCO products. They are furnished with a variation of drives, AC-DC variable speed and dual drive friction arrangements and are available with any required accessories. On the EMPCO lab mills shown below you have the choice of overhead safety bars, the knee-operated bar or both types. The EMPCO lubrication system meets any requirements your milling needs may have: oil cup, force feed or full flood oil for high temperatures. Sizes range from 4" x 4" x 9" up to 12"x12"x24" mills. A large stock of used labratory mills are always kept on hand for your immediate requirements.

8" x 8" x 20" mill is complete with Johnson® Joints, knee safety and overhead safety mill stops, connecting gears, Oil Rite drip lubricators, chrome plated rolls chain sprocketed to a 15HP gear motor.  The mill is set up for 380Volt.  All components are mounted to a self contained base.


8" x 8" x 20" lab mill with motorized adjusting screws, nip readout, air operated nylon tilting guides, with chrome rolls.


        

6" x 6" x 13" mill is complete with Electric heated Rotary Joints and temperature controllers, belly safety and overhead safety mill stops, connecting gears, Oil Rite drip lubricators, high temperature journal bushings,  chrome plated rolls chain sprocketed to a 7 1/2 HP gear motor.  These mills can be set up from 220-460Volt.  All components are mounted to a self contained base.


10" x 10" x 13" mill is complete with Johnson Joints, FPM readout, belly safety and overhead safety mill stops, connecting gears, Oil Rite drip lubricators, chrome plated rolls chain sprocketed to a 20HP Variable speed motor.  The mill is set up for 460Volt.  All components are mounted to a self contained base.


New EMPCO 10" x 10" x 24" Top Cap Mill, complete with Johnson Joints, belly safety and overhead safety cage,  connecting gears, Oil Rite drip lubricators, chilled iron rolls chain sprocket to a 15HP constant speed motor.  The mill is set up for 460Volt.  All components are mounted to a self contained base.


 

New EMPCO 10" x 10" x 24" Top Cap Mill, complete with Electric Rotary Joints, belly safety and overhead safety cage,  Dual 15HP Variable Speed Drive, Roller Bearings with flood lubrication, drilled steel rolls chain sprocket to motors.  The mill is set up for 460Volt.  All components are mounted to a self contained base.


 

Cracker Mills

Cracker mills have become vital part of the rubber processing, recycling, and tire reclamation industries throughout the world. EMPCO has helped to pioneer the design of this type of equipment for its customers. From the milling of raw tire pieces into powder to the grinding of large pieces of raw materials that the plastics industries use - EMPCO is there to provide solutions to our customer's equipment requirements. Our engineering department will work closely with your engineers to custom design equipment for any application required.

 21" x 24" x 36" Heavy Duty Fine Grind Cracker Mill complete with Bullgear pinion drive and connecting gears, hopper, and customers loading system.


New EMPCO 21" x 24" x 36" Top Cap, Variable-Speed Cracker Mill, complete with Johnson Joints, belly safety and overhead safety cable, ZURN Universal Joint, Grease Pump lubrication System, chilled iron rolls, front roll driven by 100HP variable speed drive, rear roll driven  by a 250HP variable speed drive, and Motor Starter and Control box. The mill is set up for 460Volt.  All components are mounted to an Box Tubing Base. Drives and Mill base can be Disassembled.


Rebuilt 21" x 24" x 36" Top Cap Cracker Mill, complete with Johnson Joints, belly safety and overhead safety cable, ZURN Universal Joint, Grease flood lubrication system with pressure monitoring and safety bell, chilled iron rolls, rear roll driven by 250HP constant speed drive. The mill is set up for 575Volt.  All components are mounted to an I-beam Base. Drive base and Mill base can be removed from each other.


Calenders

EMPCO also keeps an inventory of used Calenders for our customers. Our engineering department can work with your plant engineers to design a new system as well. Contact us today to see what's in stock!                          

                


 

          

Rebuilt 16" x 16" x 48" Calendering Machine. Complete with variable speed 75HP drive, top roll automatic adjustment, windup system, even speed connecting gears, and electrical controller.


New EMPCO 16" x 16" x 48" Calendering Machine. Complete with variable speed 60HP drive, top roll automatic adjustment,  even speed connecting gears, motorized lubrication system, roller bearing, same side drive layout, Calender is set up on a base and moves on track with casters to move out of way for maintenance.


 

 

New EMPCO 14" x 14" x 36" Calendering Machine. Complete with variable speed 10HP drive, top roll automatic motorized adjustment,  even speed connecting gears, motorized pump lubrication system, roller bearing,  manual adjustment bottom roll.  Calender is set up on a base/caseters and moves on track with casters to move out of way for maintenance.


Please contact us with your requirements.

Return to Homepage

©Copyright 2000, All Rights Reserved.
MausTech;)
Comments - Questions? Contact our webmaster

Last update:4/1/09